in order for the bluetooth®-enabled device to operate with the bose® product, the device and the bose product need to be paired. follow the steps below to connect the two devices using bluetooth® technology.
put the headset in pairing mode by pressing and holding the bluetooth® function button on the control module for at least five seconds. the bluetooth® led will begin to flash slowly
on the phone, turn on the bluetooth® technology. this usually involves going to a "setup," "connect," "wireless" or "bluetooth®" menu
within the bluetooth® menu of the phone, enable the setting on the phone that allows it to "scan," "search," "discover" or "add" a bluetooth® device
The phone will discover the headset as "BOSE® A20®" and ask to confirm pairing with this device. Accept by pressing "Yes" or "OK" and confirm with the passkey/PIN of 0000 (four zeros), if needed
the bluetooth® led and power led will flash in synchronisation to indicate that pairing is complete.
set the multifunction switch to the top or middle position
briefly press the bluetooth® function button on the headset control module
Note: The headset automatically attempts to recover a lost connection for a period of five minutes after becoming disconnected from the phone.