Reconnecting a Bluetooth device that you have already connected

To select a device from your product memory, voice prompts must be on. If you turned them off, see Enabling or disabling voice prompts for help turning them on. When reconnecting a Bluetooth® device as described below, you can only connect to one device at a time.

1. With your product powered on, press the Bluetooth button to hear which device is selected.
2. Within 2 seconds, press the Bluetooth button again to select to the next device in memory.
3. Repeat step 2 until you hear the name of the device you want to connect.

See troubleshooting for Cannot connect a Bluetooth device.

You can store up to eight devices in the speaker device list, and the speaker can be actively connected to up to two devices at a time.
When powered on, the speaker automatically connects to the two most recently-connected devices.
You can play audio from only one device at a time.

NOTES:

• The devices must be within range (30 ft or 9 m) and powered on.
• Make sure the Bluetooth feature is enabled on your devices.
• If the speaker is connected to a USB audio source when powered on, it doesn’t reconnect to any Bluetooth devices. To reconnect to a device, use the device Bluetooth settings.

To reconnect to a different previously-connected device, use that device's Bluetooth settings.

NOTES:

• The device must be within range (30 ft or 9 m) and powered on.
• If two devices are already connected to the speaker, you must disconnect one of them before reconnecting a third previously-connected device.