Powering your ToneMatch mixer:
Use with an L1 model II or L1 model 1S system
Connect a ToneMatch cable from the ToneMatch port on the mixer to the ToneMatch port on the L1 power stand. (Tip: Turn off the L1 to avoid a popping sound when connecting and powering on the mixer.)
Use with any other system
A power supply is available to power the ToneMatch mixer for use with any sound system other than the L1 model II or model 1S, which power the mixer without a power supply. Connect the power supply to the ToneMatch port on the mixer, then connect a power cord from the power supply to an AC (mains) outlet.
