Back to article
3348
Note: The system will stay in "powering down" mode for 12 minutes after being turned off.
Understanding LED indicator status lights and information
Find out what the LED indicator light on your product tells you about the status of your product.
Speaker Array LED Status Indicator
LED State | Description | |
---|---|---|
Off | Speaker array and Acoustimass module are connected | |
Slow Blinking Orange | Speaker array is available to make a wireless connection | |
Fast Blinking Orange | Speaker array is disconnected and trying to connect | |
Solid Green | ADAPTiQ system is running | |
Blinking Green | ADAPTiQ system is calculating data | |
Solid Red | System error or Acoustimass module connection issue |
Control Console LED Status Indicator
LED State | Description | |
---|---|---|
Off | No power | |
Solid Red | System is off (Standby) | |
Blinking Green | System is starting | |
Solid Green | System is ready to use | |
Solid Amber | System is powering down, or system is off and charging an iPod |
Acoustimass Module LED Status Indicator
LED State | Description | |
---|---|---|
Solid Orange | Speaker array and Acoustimass module are connected | |
Blinking Orange (every 3 seconds) |
Acoustimass module is disconnected from speaker array (or speaker array is off: Acoustimass module standby) |
|
Slow Blinking Orange | Acoustimass module is available to make wireless connection | |
Solid Red | System error |
Was this article helpful?
Thank you for your feedback!