Stores

SoundLink® Wireless Mobile speaker

Sold from 2011 – 2014

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Understanding LED indicator status lights and information

Find out what the LED indicator light on your product tells you about the status of your product.

SoundLink Mobile LED Status Indicators

Battery Indicator (when checking battery status)

Color Indicates
Green 70% or more of full charge
Yellow 20% to 70% of full charge
Red 20% or less (charging needed). If the battery LED is flashing red when not checking the battery, see Battery light is quickly blinking red

Battery Indicator (while charging)

Color Indicates Details
Yellow Battery is Charging The color of the LED will remain yellow until the battery reaches 100%. Once at 100% the LED will turn off (not turn green) and the system will stop charging so there is no risk of overcharging.
Off Charging Cycle Done Once the battery reaches 100% the system will stop charging and the LED will turn off. If the system remains connected to AC power and the battery drains to about 80% charge the system will start to charge the battery again (yellow LED will turn back on). This helps preserve battery life by minimizing charge cycles and will continue until AC is disconnected.

Battery Indicator (when in use)

Color Pattern Indicates
Yellow Very Fast Flash (4 times second) System thinks battery temperature is outside of -20°C to +65°C range and has disabled all functionality for safety/reliability reasons.
Yellow Fast Flash (2 times second) The battery is in pre-charge mode (will stop and go solid after a short time) or that the battery pack is either too hot or cold to charge (outside 0°C - 45°C).

SoundLink Wireless Mobile Speaker LED Status Indicators

Bluetooth® LED State Description Indicates
Off   Wireless source is not selected
On   Wireless source is connected
Fast Flashing Flashes on and off twice every second Wireless source is connecting
Slow Flashing Flashes on and off once every three seconds Wireless source is not connected and system is available to connect to a previously paired device
Slow Pulsing Fades on and off once every second System is in discovery mode and waiting for a signal

To check the battery status, see Checking the remaining battery charge

If all three white LEDs are lit at the same time see, All LEDs are lit at the same time

If the battery LED is flashing red when not checking the battery, see Battery light is quickly blinking red

If the battery LED is solid red all the time, see Battery light is always red

If the battery LED is solid yellow for longer than 10 hours while charging, see Battery LED is solid yellow after charging for an extended period of time
Was this article helpful?
Submit
Thank you for your feedback!