Stores

Bose QuietComfort® 35 II Gaming Headset​

Sold from 2022 – present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

No audio from product

If your product seems to be set up properly but does not produce sound, try the following:

Bluetooth® operation is disabled while charging.

The headset begins charging when connected to a charger or powered USB jack. While charging, Bluetooth functionality is disabled. To play audio from and/or pair Bluetooth devices, disconnect the headset from the charger once it is sufficiently charged.

Alternatively, you can listen to audio while charging the headset by using the supplied backup audio cable.

In the sound settings menu of the connected device, verify headphone audio is not muted, disabled or the volume level is set too low.

Note: The instructions below are subject to vary due to reasons such as different operating system software versions, user interface settings, and hardware capabilites.
 
  • On a Playstation 5, press the logo on the controller open the home screen then select Settings > Sound > Audio Output. Set the Output Device to Headset (Controller) then set Output to Headphones as desired.
     
  • On a Playstation 4, press the logo on the controller to open the Quick Menu then select Sound/Devices. Raise the Volume& Control (Headphones) setting then set Output to Headphones as desired.
     
  • On an Xbox One system, press the logo on the controller to open the guide, select the Profile & system icon then select Audio.. Raise the Headset volume level.
     
  • On a PC running Windows 10, right-click on the speaker icon in the lower-right corner of the screen then select Open Sound settings. When the Bose PC desktop controller is in use, set the Choose your output device selection to Headphones (Bose PC Desktop Controller), otherwise select the option that refers to the hardware the headset is connected to.
     
  • On a Mac, open the Apple menu then select System Preferences > Sound > Output. When the Bose PC desktop controller is in use, set Bose PC Desktop Controller as the device for sound output, otherwise select the option that refers to the hardware the headset is connected to.

If connected to an Elite controller, plug the headset in using the following method:

  1. Open the Profile & system menu of the console
  2. Insert the 3.5 mm connector into the controller as far as it can go without using any force
    audio connector partially inserted into controller
     
  3. While viewing the Profile & system menu, slowly move the 3.5 mm connector into the controller until the Audio menu appears
  4. Open the Audio menu. The headset connection is complete when all three volume sliders are active

Confirm the headset is connected to the Bluetooth device.

Power on the headset, then press any button to view the Bluetooth and battery lights. If the Bluetooth light is flashing or not lit, the headset is not connected. Try reconnecting the headset in the Bluetooth settings of the device. If is still doesn't connect, see Cannot connect a Bluetooth device.

Reboot the Bluetooth® device.

Electronics might need to be reset on occasion to correct minor issues. This is typically done by shutting down the device, then powering it on again.

Be sure your product is within 33 feet (10 meters) of the Bluetooth® device.

Bluetooth range is about 33' (10 m). This range can be reduced by obstacles (i.e. walls, doors, pockets, nearby Bluetooth devices, etc.). Try moving the device and product closer together.

If adding a device to Windows 10, be sure to connect to the Bluetooth® device with the headset or speaker icon.

In Windows 10, your product shows up twice in the Bluetooth device list: once with a device icon and LE- before the product name and once with a headphones or speaker icon. Select the option with the headphones or speaker icon. Do not select the LE- listing.

Tip: If you already paired to the device icon, just connect your product again and choose the listing with the headphones or speaker icon. For more information, see Connecting a Bluetooth device.

Windows 10 Add a device screen

Try a different app.

If the issue only occurs with a particular app, it is likely related to the app or app settings.

Determine if the issue occurs with another Bluetooth® device.

The source device currently paired to your product may be causing the issue. Try pairing a different Bluetooth source to see if the issue is isolated to that device.

Clear your product's memory of previously paired Bluetooth® devices, then reconnect.

Your product remembers the last several devices it connected to so it can quickly reconnect to them. In case of an issue with the device memory, clear its Bluetooth pairing list, then reconnect your device. For more information, see Clearing the product memory of paired Bluetooth devices and Connecting a Bluetooth device.

Remove your product from the memory of the Bluetooth® device, then try again.

In the Bluetooth settings of the Bluetooth device, find the list of previously connected products. Remove your product from the list, then reconnect it to the device. For more info, see Connecting a Bluetooth device.

If the device has a headphone jack, connect to it using an audio cable.

  1. Connect either the gaming microphone or the smaller end of the back-up audio cable to the left earcup
  2. Plug in the other end of the cable to the 3.5 mm headphone jack on your device

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!