Setting up your product

For speaker placement suggestions, see Speaker placement and positioning.

1. Connect audio input cable from the Audio In jack on the soundbar to the Audio Out jack on the system console
   Tip: Face the flat side of the plug upward so it aligns properly
2. Connect an HDMI cable from the HDMI OUT Video to TV jack on the system console to your TV
3. Connect a power cord from the soundbar to an AC (mains) outlet
4. Connect a power cord from the bass module to an AC (mains) outlet
5. Connec the power supply to the Power jack on the system console
6. Connect a power cord from the power supply to an AC (mains) outlet

The speaker array and bass module automatically pair together. If they do not, there could be wireless interference preventing them from pairing. For these situations, a wired connection is available.

For more information on how to run ADAPTiQ, see ADAPTiQ system setup and deactivation.

The ADAPTiQ audio calibration software, included with the system, automatically tests the acoustics of the listening area, analyzes speaker placement and tailors the sound of the system to the specific acoustics of the room.

For more info, see Connecting other devices to your system.