Bose Frames Soprano

Sold from 2020 – present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Replacing your lenses

Replacement lenses are available in different colors as accessories for your Bose Frames. Find out how to remove the lenses from your Frames and insert replacements.

Before you begin:

We recommend using the included cloth when touching the lens to avoid scratches. Place a towel on a sturdy surface in case you accidentally drop a lens.

IMPORTANT: Only the following Frames have been tested and approved for prescription lenses in all regions globally:
  • Tempo
  • Tenor
  • Soprano 

Replacing the lenses:

Removing lenses

  1. Place a towel on a sturdy surface in case you accidentally drop a lens
  2. To remove a lens, hold the Frames so they face away from you
  3. Place your thumbs in the bottom corner closest to the bridge
  4. Press firmly until the entire lens pops out from the frames
    Note: The lenses are made to be replaced, and some pressure is required to remove them.

Inserting lenes

  1. To replace a lens, hold the Frames so they face you
  2. Remove the lenses from the packaging, making note which is the left lens and which is the right lens
  3. Insert the a lens to the appropriate side of the Frames, then apply pressure in this order:
    1. Start with the top corner closest to the bridge
    2. Proceed to the other top corner
    3. Press the corner below that
    4. Press the bottom corner closest to the bridge

To clean the lenses, wipe them softly with the microfiber cloth bag.
Was this article helpful?
Submit
Thank you for your feedback!