Stores

SoundLink® Wireless Mobile speaker

Sold from 2011 – 2014

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Charging the battery

Find out how to charge the battery in your product so you can use it on the go.

To charge the battery:

If your battery is not connected to your product, see Replacing the battery in your product.

Connect the power supply from the DC POWER jack on your product to an AC (mains) outlet. The battery light glows yellow while charging and turns off when charged. Typically, the battery will fully charge in about 3 hours; this varies depending on the charge level and if the product is in use while charging. In some cases, it can take up to 10 hours to fully charge.

Tip: If the charger is connected when the battery is at or near full charge, it will not charge until the battery level drops to a level where charging is needed.

Plugging in overnight will not overcharge the battery

Lithium batteries have a built-in auto-off feature when a full charge is reached to prevent the battery from being overcharged. Even while still plugged in, the battery level will have to drop below a certain point to trigger the charging again.
Was this article helpful?
Submit
Thank you for your feedback!